Ziflex Ultimate High Temp Upper Surface
Ziflex Ultimate High Temp Upper Surface

Ziflex Ultimate High Temp Upper Surface

Regular price €22.90
/
Tax included.

⚠️ This article isn't a complete Ziflex, but only the upper replacement part. New Ziflex are not compatible with the first generation of magnetic base. 

The upper surface of your Ziflex allows you to quickly and easily start printing on a brand new surface. You do not need to change the magnetic base, you can just remove your old Ziflex upper surface and put this brand new surface on your magnetic base already installed.  

 

✓ Max heated bed temp: 120°C 
 Good adhesion to PLA, ABS, PETG, TPU, Woodfill and more. 
 Uniform heat transmission.
✓ Maximum Nozzle temp: 260°C (Depends on the calibration your printer) 

Ziflex is two magnetic layers system and is easy to install: 
→ One magnetic plate with 3M adhesive to stick to your original build plate (Usually a glass bed)
→ One magnetic plate with a surface coating that ensures strong adherence to many materials
We created the Ziflex to fit many printers, but if you need a special dimension that isn't in this list, feel free to email us at: hello@zimple3d.com.

Ziflex works with a lot of autocalibration systems, but not all of them: for example, the Ziflex Ultimate doesn't work with inductive autocalibration, but the PEI one do work. If you have any doubt about your autocalibration, feel free to contact us, we'll be glad to assist you!

Ziflex can fit with many different 3D printers, and this makes it a product highly subject to errors of use. Calibration and settings are variables from one to another 3D printer: the installation tips will provide you with some help but they aren’t a detailed tutorial to each machine. That's why once the Ziflex has been installed and used, we can’t make any refund or return.

Customer Reviews

Based on 25 reviews
88%
(22)
12%
(3)
0%
(0)
0%
(0)
0%
(0)
G
G.B.
1/2 Ziflex supérieur

Après presque 2 ans d’impressions quasi-quotidiennes, il était temps de changer mon Ziflex v.2. Toujours impressionné par l’adhérence de cette surface pour le PLA et TPU (je n’imprime pas du ABS), je recommande Ziflex à tous !!!

P
P.B.
tres bon produits

j equipe toute mes imprimantes avec Ziflex

P
P.D.
Final settled on a build surface

Really don't know how many build surface types and brands I've tried but I've finally settled on this one.

I've only bought a new surface to be ready to replace my first one, that I've done hundreds of hours of printing upon, but as yet the original is still doing its job.

I have to admit I nearly always use rafts because I hate the anxiety that a print will detach mid job, but I've not had a single print come loose when on a raft with the Ziflex, and I've also done a number of large flat prints non rafted that didn't detach either.

No build surface is perfect, but this is the best one I've found so far.

O
O.S.

High Temp Ultimate Upper Surface

M
M.
Qualität fast perfekt

Durch die sehr feine Oberfläche ist perfektes Leveln des Bettes nötig.Dann haben bei mir alle Materialien (ABS,PETG,PLA,PLA+,ASA,PLA-Wood) super Haftung.Einen Stern abzug,weil die Oberfläche (vermutlich durch das Verkleben mit der Magnetschicht) stellenweise nicht Plan ist und weil es durch die Fertigung der Oberschicht minimale Längsriefen gibt.

Customer Reviews

Based on 25 reviews
88%
(22)
12%
(3)
0%
(0)
0%
(0)
0%
(0)
G
G.B.
1/2 Ziflex supérieur

Après presque 2 ans d’impressions quasi-quotidiennes, il était temps de changer mon Ziflex v.2. Toujours impressionné par l’adhérence de cette surface pour le PLA et TPU (je n’imprime pas du ABS), je recommande Ziflex à tous !!!

P
P.B.
tres bon produits

j equipe toute mes imprimantes avec Ziflex

P
P.D.
Final settled on a build surface

Really don't know how many build surface types and brands I've tried but I've finally settled on this one.

I've only bought a new surface to be ready to replace my first one, that I've done hundreds of hours of printing upon, but as yet the original is still doing its job.

I have to admit I nearly always use rafts because I hate the anxiety that a print will detach mid job, but I've not had a single print come loose when on a raft with the Ziflex, and I've also done a number of large flat prints non rafted that didn't detach either.

No build surface is perfect, but this is the best one I've found so far.

O
O.S.

High Temp Ultimate Upper Surface

M
M.
Qualität fast perfekt

Durch die sehr feine Oberfläche ist perfektes Leveln des Bettes nötig.Dann haben bei mir alle Materialien (ABS,PETG,PLA,PLA+,ASA,PLA-Wood) super Haftung.Einen Stern abzug,weil die Oberfläche (vermutlich durch das Verkleben mit der Magnetschicht) stellenweise nicht Plan ist und weil es durch die Fertigung der Oberschicht minimale Längsriefen gibt.